How To Clean An Area Rug With Pressure Washer?

How To Clean An Area Rug With Pressure Washer

In this post, I will explain How To Clean An Area Rug With Pressure Washer so read on..

Area rugs are a great way to add flair to your home’s decor. They’re also more practical than you might think, and can be used as soft surface for lounging on the floor, making them great for families with young kids! However, Area rugs get dirty too and need to be cleaned from time-to-time. With the help of a pressure washer that is!

I used to have an area rug in the middle of my living room that would always get dirty and never look clean. I quickly found out that a pressure washer would do more than just make it dry! It would also clean it and make it look like new, quick and easy.

At first, I thought it might be too hard to press down on the pump, but after a few tries it became easier and easier.

If you want to figure out how to use a pressure washer, or you’re looking for a way to make cleaning your rugs easy, this is the way to go.

Let us show you how this cleaning process works and what it entails.

How to clean an area rug with pressure washer?

Area rugs are a great way to add flair to your home’s decor. They’re also more practical than you might think, and can be used as a soft surface for lounging on the floor, making them great for families with young kids! However, Area rugs get dirty too and need to be cleaned from time-to-time. With the help of a pressure washer that is! Let us show you how this cleaning process works and what it entails.

This article will teach you how to clean an area rug using a pressure washer in three easy steps. You’ll learn about all of the different parts of an area rug including its backing material, pile height, and fiber type. You’ll also learn about the different types of pressure washers and the kind of nozzle you need to use for this process, so be sure to pay attention!

First off, let’s start with a little area rug anatomy – all area rugs have a backing material , pile height, and fiber type .

Most Common Backing Materials for Area Rugs

For the backing material, you’ll mainly see polypropylene and polyester. As their names suggest, one of these materials is made from plastic while the other is made from synthetic yarns such as nylon or acrylic. Some area rugs will include a cotton backing in addition to the plastic and synthetic backings we just mentioned. Cotton is a popular backing material because it reduces the amount of moisture that seeps through the rug and into the floor underneath, especially when compared to plastic and synthetic backings.

Area Rug Pile Height

Moving on to pile height , this simply refers to how deep or fluffy an area rug’s fibers are. An area rug’s pile height can range anywhere from 1/4 inch to 6 inches. The shorter the pile, the easier it is to clean an area rug since you won’t have to worry about it getting caught in your pressure washer’s rotating nozzle. However, using a higher pressure setting will be necessary when removing stubborn stains that are set into the rug.

Fiber Types for Area Rugs

Lastly, you’ll need to know the area rug’s fiber type . Area rugs are made from all sorts of materials including wool, silk, cotton, acrylic, nylon, polyester and rayon. Each material has its own set of advantages over the others. For example, wool is very absorbent, making it a great option for an area rug that’s going to be used on the floor.

Wool Area Rugs: Pros & Cons

On the other hand, wool is more difficult to clean as it contains oils and acids that make stains harder to remove. Some people might suffer from allergies when exposed to wool, so keep this in mind if you’re allergic to wool or have someone in your family who is.

As far as cleaning an area rug goes, being aware of the different parts of the rug will help you determine what type of pressure washer nozzle you’ll need to use. You’ll need a special “garden” nozzle that comes with three settings – rinse, detergent, and cleaning. The rinse setting will spray a steady stream of water to remove any large chunks of dirt from the rug’s surface. The detergent setting injects soap into the water stream for better stain removal.

Finally, the “cleaning” setting sprays out a concentrated shot of water that you’ll need to use on stubborn stains.

That covers the three different pressure washer nozzles you’ll need to use. Now let’s talk about which other materials and equipment you’ll also need for the process.

Materials & Equipment Needed

You’ll need a few additional items that aren’t part of your pressure washer, such as rubber gloves, a face mask, and a bucket. If you plan on using soap, then we recommend having a squeegee and a spray nozzle for your garden hose as well.

As far as the actual rug goes, make sure that it’s lying flat before you begin to clean it in order to prevent any damage to its pile height or backing material. Make sure it isn’t in direct sunlight or in a room that has high humidity. You’ll also need to remove any loose dirt, debris, and pet hair before cleaning the rug so you don’t get it tangled into your pressure washer’s rotating nozzle.

Will pressure washing a rug ruin it?

Pressure washing a rug will not ruin it. It is important to use the correct pressure setting because too much pressure can cause damage to the rug. Using the pressure washer at the wrong pressure setting might cause rips or holes in the fabric of your rug, or even cause it to unravel, so be careful when using it.

You also need to make sure your rug is laid flat when you are cleaning it. The reason for this is because if the rug isn’t laid out flat then the water pressure will be uneven and could cause damage or missed areas of the rug.

How do you clean a heavy area rug?

To clean a heavy area rug, use a hose and nozzle that is pressure-powered. Turn the hose on and put the nozzle as close as possible to the rug without getting your hands wet. Pull the nozzle away from the rug and turn it off so you can move to an area of the rug that needs more cleaning.

How To Clean An Area Rug With Pressure Washer

Can I Power wash my wool rug?

You cannot power wash a wool rug with a rotating brush as this will damage the wool fibers. You can, however, use a shampooer to clean your rug. Use your shampooer on the gentle cycle and use cold water. Allow the rug to dry before using it again.

You can use a power washer on wool rugs if you do not turn the pressure higher than five pounds, and if you are absolutely sure that your rug will not be damaged. You should also clean your rug more often than normal, so it doesn’t get so dirty in the first place.

Do not use any chemicals to clean your wool rug, as this will ruin it. You can use a power washer or a mild dish soap and water to clean your rug. Do not use clorox bleach on any part of your rug, as this could damage it.

You should take special care when cleaning wool rugs. Do not use chemicals to clean them because this could ruin the rugs. Use a mild dish soap and water to clean your rug, and use cold water to rinse it out thoroughly. Do not turn up the power on your pressure washer because this can damage the fibers in the rug, or cause it to lose its shape.

How To Pressure Wash Oriental Rug?

The first step when washing your oriental rug is to remove any dirt that has accumulated on the rug. You can use a vacuum cleaner or, if you’re fortunate enough to own one, a rotary brush.

The steps are the same for both; sweep across the surface of the rug, starting at one side and working your way to the opposite side. Be sure to use an attachment with stiff bristles, as it will be more effective in removing dirt than one with soft bristles.

The next step is to fill your machine’s water reservoir with liquid detergent and liquid bleach. Turn on your machine and begin spraying all over the surface of the rug.

Next, use a clean towel or rag to wet down the kerchief on the top of the rug. Be sure to keep your wet rag or towel in constant motion, as you do not want to leave any wet spots behind. Continue until the entire surface of the rug is wet with cleaning solution.

At this point, use a clean towel to dry up all of the excess water from your oriental rug. A fan works well for this purpose.

Lastly, use a carpet rake to work out any remaining debris from your rug. This will allow you to easily vacuum up the remainder of the dirt and clean your Oriental rug back to its previous luster.

We hope you enjoyed this article on how to clean an area rug with a pressure washer!

References : How to Clean a Rug – The Home Depot

Noah Burns

I am Noah Burns- The Guy behind I will Make You Smart. I love to experiment and test new products with an aim to create informative contents for readers like you. It is my aim to make this site a leading source of information and reviews to help consumers make more informed buying decisions.

Recent Posts