How To Convert A Pressure Washer Into A Sewer Jetter?

How To Convert A Pressure Washer Into A Sewer Jetter

Pressure washers are often used to clean driveways, sidewalks, and other exterior surfaces. But did you know that they can also be converted into a sewer jetter? Simply attach the hose of your pressure washer to a garden hose that has water flowing through it. Now turn on the power of your pressure washer. This will force the stream of water out in an under-pressure condition, allowing it to penetrate below ground level. When all the dirt is removed simply turn off your power settings and let gravity do its job!

In this post, I will be explaining how to convert a pressure washer into a sewer jetter so read on..

How to convert a pressure washer into a sewer jetter

Pressure washers are often used to clean driveways, sidewalks, and other exterior surfaces. Most people don’t know that pressure washers can also be converted into a sewer jetter! Simply attach the hose of your pressure washer to a garden hose that has water flowing through it.

Now turn on the power of your pressure washer. This will force the stream of water out in an under-pressure condition, allowing it to penetrate below ground level. When all the dirt is removed simply turn off your power settings and let gravity do its job!

You’ll never have to worry about clogged drains again with this simple trick!

A pressure washer is one of the most widely used power tools in homes throughout the world. It is often used to clean driveways, sidewalks, and other exterior surfaces.

However, did you know that they can also be converted into a sewer jetter? Simply attach the hose of your pressure washer to a garden hose that has water flowing through it.

Turn on the power of your pressure washer and this will force the stream of water out in an under-pressure condition, allowing it to penetrate below ground level. When all the dirt is removed simply turn off your power settings and let gravity do its job!

What is a Sewer Jetter?

A sewer jetter is a device that is used to clear obstructions from sewers. It’s fitted to the end of a hosepipe, and water is pumped through it at high pressure. The jetter itself can be placed into the drain opening, or if the obstruction is outside the pipe it simply blasts water over it to clear away any blockages that may be there.

How to Use a Sewer Jetter

  • Connect the hose of your pressure washer to a garden hose that has water flowing through it.
  • Turn on the power of your pressure washer. This will force the stream of water out in an under-pressure condition, allowing it to penetrate below ground level. When all the dirt is removed simply turn off your power settings and let gravity do its job!

How many PSI is a sewer jetter?

A sewer jetter is a device that is used to clear obstructions from sewers. It’s fitted to the end of a hosepipe, and water is pumped through it at high pressure. The jetter itself can be placed into the drain opening, or if the obstruction is outside the pipe it simply blasts water over it to clear away any blockages that may be there.

This varies depending on the model. Sewer jetters start with about 60 PSI but can go up to 125 PSI for heavy-duty use.

Why would you need a sewer jetter?

Sewer jetters can be an inexpensive and easy option for anyone who needs the pipes unclogged. A vacuum that captures leftover particles is not practical if you can’t get to both ends of the pipe at the same time, such as when one end is located in a basement or underground pit. A sewer jetter has no such restrictions.

It carries water under pressure through a garden hose down one side of the pipe and out through holes on the other side, clearing clogs by blasting debris or grease into a wastewater treatment facility before it can accumulate in your home or business. The result: complete peace of mind about what’s going on with your sewers!

What is a Sewer Jetter Conversion Kit?

A Sewer Jetter Conversion Kit is a kit that converts your pressure washer into a sewer jetter. All you have to do is attach your water hose of your pressure washer to a garden hose with water flowing through it. Then turn the power on the pressure washer and watch as the stream of water penetrates below ground level.

When all dirt is removed, turn off your power settings and let gravity do its job!

Is there any reason I shouldn’t buy a Sewer Jetter Conversion Kit?

Not at all. There are many reasons why you should get one. These kits are less expensive than buying an actual sewer jetter. They can also be stored easier than a sewer jetter since they fit easily in your garage or shed without taking up much space. And if you already own a pressure washer, then it makes sense to buy the Sewer Jetter Conversion Kit because it will save you money in the long run.

How do I know what size Sewer Jetter Conversion Kit to get?

A 1.25″ or 1.5″ sewer jetter conversion kit can be used for all RV sewer hoses. A 2″ sewer jetter conversion kit can be used for commercial sized sewer hoses.

How To Convert A Pressure Washer Into A Sewer Jetter

Can you jet your own sewer line?

There are many different things that you can use to clear out dirty pipes. One is a sewer jetter.

A sewer jetter does exactly what it sounds like: it jets the pipe with high-pressure water and rids it of all debris – including hairballs – and unblocks any blockages in the line.

The Sewer Jetter is an affordable and easy-to-use tool that can be used by homeowners to fix their own clogs and keep their house free from gross plumbing issues. The Sewer Jetter makes the job so much easier than before, especially because there’s no need to empty the tank or constantly refill it with gas!

A sewer jetter is a common tool for plumbers, but it can be quite expensive, especially if you hire one often.

A pressure washer can be used as a sewer jetter too!

Pressure Washers are typically used to clean surfaces such as driveways and sidewalks – but did you know that they can also be converted into a sewer jetter?

All you need to do is connect the hose of your pressure washer to a garden hose that has water flowing through it. Next, turn on the power of your pressure washer. This will force the stream of water out in an under-pressure condition, allowing it to penetrate below ground level. When all the dirt is removed, simply turn off your power settings and let gravity do its job!

What are Some Other Uses for a Pressure Washer?

Many people don’t realize that pressure washers are not just used to clean driveways, sidewalks, and other exterior surfaces. Here are some more uses for pressure washers:

  • Clean boats
  • Clean concrete walks & driveways
  • Get rid of mold & mildew
  • Clean out dirt and debris from hard to reach places
  • Cleaning bird droppings off brick
  • Convert into a sewer jetter
  • And many more!

Conclusion

To convert your pressure washer into a sewer jetter, all you need to do is connect the hose of your pressure washer to a garden hose that has water flowing through it. Next, turn on the power of your pressure washer and watch as the stream of water penetrates below ground level. When all dirt is removed, simply turn off your power settings and let gravity do its job!

References : Drain cleaner

Noah Burns

I am Noah Burns- The Guy behind I will Make You Smart. I love to experiment and test new products with an aim to create informative contents for readers like you. It is my aim to make this site a leading source of information and reviews to help consumers make more informed buying decisions.

Recent Posts